Importance of Surface Morphology of Steel Fibres Used in UHPC Reinforcement
Abstract
The addition of steel fibres to concrete helps to reduce its inherent brittleness while improving its mechanical properties. Concrete has a low tensile strength which can be improved by the addition of steel fibres. This increase in strength prevents the formation and propagation of cracks, thereby increasing the durability of the concrete. The addition of steel fibres also improves the impact and dynamic strength of concrete. As a result, they are often used in highly stressed structures such as tunnels, bridges, roads and industrial floors.
The aim of this study was to determine the importance of the surface morphology of steel fibres in relation to concrete reinforcement, and in particular to investigate its effect on the production process of Ultra High Performance Concretes (UHPC). It was found that fibres with surface scratches exhibited increased adhesion and agglomeration, resulting in uneven distribution during the production of UHPC. The use of scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS) revealed that surface roughness causes agglomeration due to the formation of static electricity and subsequent attractive forces.
References
C. Frazão, J. Barros, J. A. Bogas, V. García-Cortés, and T. Valente, “Technical and environmental potentialities of recycled steel fiber reinforced concrete for structural applications,” J. Build. Eng., vol. 45, p. 103579, 2022, https://doi.org/10.1016/j.jobe.2021.103579.
M. N. Amin, W. Ahmad, K. Khan, and A. Ahmad, “Steel fiber-reinforced concrete: a systematic review of the research progress and knowledge mapping,” Materials, vol. 15, no. 17, p. 6155, 2022, https://doi.org/10.3390/ma15176155.
M. Kurtay, H. Gerengi, and Y. Kocak, “The effect of caffeine molecule on the physico-chemical properties of blended cement,” Constr. Build. Mater., vol. 255, p. 119394, 2020, https://doi.org/10.1016/j.conbuildmat.2020.119394.
H. Gerengi, Y. Kocak, A. Jazdzewska, and M. Kurtay, “Corrosion behavior of concrete produced with diatomite and zeolite exposed to chlorides,” Comput. Concr., vol. 19, no. 2, pp. 161-169, 2017, https://doi.org/10.12989/cac.2017.19.2.161.
M. Khan, and M. Ali, “Improvement in concrete behavior with fly ash, silica-fume and coconut fibres,” Constr. Build. Mater., vol. 203, pp. 174-187, 2019, https://doi.org/10.1016/j.conbuildmat.2019.01.103.
X.Huo, P. Wang, S. Wang, R. Guo, and Y. Wang, “Experimental study on the mechanical properties and impermeability of basalt-PVA hybrid fibre reinforced concrete,” Case Stud. Constr. Mater., vol. 21, p. e03646, 2024, https://doi.org/10.1016/j.cscm.2024.e03646.
V. Özdal, M. Maraşli, H. Gerengi, and K. Dikmen, “Corrosion behavior of embedded pad hook in glass fiber reinforced concrete,” Civil Engineering Desing, vol. 5, pp. 18-24, 2023, https://doi.org/10.1002/cend.202200012.
H. Gerengi, M. Maraşlı, M. Rizvi, B. Kohen, and İ. Taşkıran, “Protection of steel hooks embedded in glass-fiber-reinforced concrete against macrocell corrosion,” Pet. Res., vol. 9, no. 2, pp. 317-326, 2024, https://doi.org/10.1016/j.ptlrs.2024.01.001.
H. Gerengi, M. Maraşlı, B. Kohen, D. Ramazanoğlu, and K. Coşkun, “Effectiveness of zinc-rich coating in preventing weld zone corrosion in GFRC facade anchorage elements,” 9th International Congress on Engineering and Technology Management, 29-30-01 April - May 2023, İstanbul, Türkiye.
M. Marasli, K. Dikmen, V. Akmaz, M. Kam, and H. Gerengi, “Investigation of the effect of acid rain on the corrosion mechanism of the anchorage element used in glass fiber reinforced concrete,” 7th International Congress on Engineering, Architecture and Design, 21-22 May 2021, İstanbul, Türkiye.
K. Coşkun, H. Gerengi, M. Maraşlı, F. A. Birinci, and V. Özdal, “Use of corrosion inhibitors in stainless steel anchors used in glass fiber reinforced concrete (GRC) precast facade elements,” The European Journal of Research and Development, vol. 3, no. 1, pp. 1-16, 2023, https://doi.org/10.56038/ejrnd.v3i1.220.
Y. Tai, L. Yang, D. Gao, K. Kang, Z. Cao, and P. Zhao, “Properties evolution and deterioration mechanism of steel fiber reinforced concrete (SFRC) under the coupling effect of carbonation and chloride attack,” J. Build. Eng., vol. 95, p. 110275, 2024, https://doi.org/10.1016/j.jobe.2024.110275.
H. Zhang, H. Li, T. Lin, Z. Shen, and Q. Feng, “Experimental investigation on influence of embedment length, bar diameter and concrete cover on bond between reinforced bars and steel fiber reinforced concrete (SFRC),” Case Stud. Constr. Mater., vol. 21, p. e03742, 2024, https://doi.org/10.1016/j.cscm.2024.e03742.
W. Xu, L. Yang, D. Gao, J. Tang, G. Sun, and Y. Zhang, “Mechanical properties of seawater-mixed steel fiber reinforced concrete,” J. Build. Eng., vol. 73, p. 106823, 2023, https://doi.org/10.1016/j.jobe.2023.106823.
J. P. B. van Dam, S. T. Abrahami, A. Yilmaz, Y. Gonzalez-Garcia, H. Terryn, and J. M. C. Mol, “Effect of surface roughness and chemistry on the adhesion and durability of a steel-epoxy adhesive interface,” Int. J. Adhes. Adhes., vol. 96, p. 102450, 2020, https://doi.org/10.1016/j.ijadhadh.2019.102450.