Choosing of Single Phase to Three Phase Converter with Fuzzy Topsis Method
Abstract
In this study comparative analysis of the different converter models were conducted. Different switching elements such as triac, IGBT, thyristor, the transistor was used in the examined converters. Properties of switching elements affect parameters of the converters such as efficiency, stability, harmonic characteristics, sinusoidal structure, torque vibration, cost and power factor. As well in the detailed literature review, it was drawn attention that there are differences between mentioned parameters in the models where different switching elements are connected with different connection forms. The requirements of the converters vary according to where it will be used and to the purpose of usage. In this case importance of mentioned parameters varies at the converter selection. For the applications, which require precision select having also judgements of people in, Fuzzy TOPSIS is often used. In this study, Fuzzy TOPSIS method was also used for the selection of most appropriate converter. By comparing acquired results converters were ranked according to the appropriateness level.
References
[2] J. Zhang, G.P. Hunter and V.S. Ramsden, “Performance of A Single Phase to Three Phase Cycloconverter Driveâ€, Electric Power Application, IEE Proceedings, May 1995, Vol. 142, 169-175
[3] G. V. Covic, G. L. Peters, and J. T. Boys, “An improved single phase to three phase converter for low cost AC motor drives,†in Proc. IEEE PEDS’95, 1995, pp. 549–554
[4] T.F. Chan and L.L. Lai, “Single-Phase Operation of A Three-Phase Induction Motor with The Smith Connectionâ€, Power Engineering Society Summer Meeting, Vol 4, 2000, 2453-2458
[5] X. Yang, R. Hao, X. You and T.Q. Zheng,â€A New Topology for Operating Three-Phase Induction Motors Connected to Single-Phase Supplyâ€, Electrical Machines and Systems, ICEMS 2008, Oct. 2008, 1391-1394
[6] R.Q. Machado, S. Buso and C.A. Pomilio,â€A Line-Interactive Single-Phase to Three-Phase Converter Systemâ€, Power Electronics, IEEE Transactions on, Nov. 2006, Vol. 21, 1628-1636
[7] C. Chen, D.M. Divan and D.W. Novotny, “A Hybrid Inverter / Cycloconverter-Based Variable-Speed Three-Phase Induction Motor Drive for Single-Phase Inputsâ€, Industry Applications, IEEE Transactions on, May/June 1995, Vol. 31, 630-635
[8] M.H. El-Maghraby, R.H. Thejel and M.M. Ibrahim, “New Approach for The Analysis of AThree-Phase Induction Motor of Different Ratings Connected to A Single Phase Supplyâ€, Electric Power Applications, IEEE Proceedings B, May 1992, Vol. 139, 145-154
[9] J. Xiao, W. Zhang, H. Omori and K. Matsui,â€A Novel Operation Strategy for Single-to-Three Phase Matrix Converterâ€, Electrical Machines and Systems, ICEMS 2009, Nov. 2009, 1-6
[10] C.B. Jacobina, E.C. dos Santos Jr., N. Rocha and E.L.L. Fabricio,â€Single-Phase to Three-Phase Drive System Using Two Parallel Single-Phase Rectifiersâ€, Power Electronics, IEEE Transactions on, May 2010, Vol. 25, 1285-1295
[11]P.N. Enjeti and A. Rahman,â€A New Single-Phase to Three-Phase Converter with Active Input Current Shaping for Low Cost AC Motor Drivesâ€, Industry Applications, IEEE Transaction on, Jul/Aug 1993, Vol. 29, 806-813
[12] A. Yıldız, “Bulanık Çok Kriterli Karar Verme Yöntemleri Ä°le Tedarikçi Seçimi Ve Ekonomik SipariÅŸ Miktarının Tespiti: Otomotiv Sektöründe Bir Uygulamaâ€, Marmara Ãœniversitesi, Doktora Tezi, 2013
[13] Ecer F. ve Küçük O., Bulanık TOPSIS Kullanılarak Tedarikçilerin Değerlendirilmesi Ve Erzurum’da Bir Uygulama, Ekonomik ve Sosyal Araştırmalar Dergisi, 2007, Cilt.3, 45-65.
[14] Chen, C.T. (2000), Extensions of the TOPSIS for group decision-making under fuzzy environment, Fuzzy Sets and Systems 114, 1-9
[15] Chen, C, Lin, Ching T. and Huang, S. (2006) “A Fuzzy Approach for Supplier Evaluation and Selection in Supply
Chain Managementâ€, International Journal of Production Economies, 289-301.
