F class gas turbine blade cooling calculation
Abstract
Gas turbines play a vital role in today’s industrial environment. They are used for demand power and energy sources. There are two type of gas turbines; aero derivative and industrial types. Aero derivative gas turbines are from aero plain engines and derivate for use in power manufacturing. The other and most common ones are industrial type. Industrial types are huge size and produce great power output like 250-275 MW less or more. These units are called F class, H class. In this papper we are going to analyse the cooling process of the turbine blades. Cooling process is directly effecting the gas turbine performance. That is why it is so important. Before doing that we are going to introduce components of the gas turbine and their running prienciple. This will guide us for understanding better of calculation and importance of calculation
References
[2] SE Jenny Sundberg, Heat Transfer Correlations for Gas Turbine Cooling LITH-IKP-EX--05/2313—
[3] Gorelov, Y. G. Ways of Further Enhancement the Convective Cooling of Vortex-Matrix Rotor Blades in High-Temperature Turbines of Gas Turbines Engines Thermal Engineering, Vol. 51, No 11, 2004
[4] Acharya, Zhou, Lagrone, Mahmood & Bunker Latticework (Vortex) Cooling Effectiveness Part 2: Rotating Channel Experiments Proceedings of ASME Turbo Expo 2004, Power for Land, Sea and Air, June 14-17, Vienna, Austria
[5] Van Treuren, Wang, Ireland, Jones & Kohler Comparison and Prediction of Local and Average Heat Transfer Coefficients under and Array of Inline and Staggered Impinging Jets ASME 96-GT-163
[6] Hollworth & Berry Heat Transfer from Arrays of Impinging Jets with Large Jetto-Jet Spacing Journal of Heat Transfer, May 1978, vol 100
[7] Tabakoff & Clevenger Gas Turbine Blade Heat Transfer Augmentation by Impingement of Air Jets Having Various Configurations Journal of Engineering for Power, January 1972
[8] Huber & Viskanta Effect of Jet-Jet Spacing on Convective Heat Transfer to Confined , Impinging Arrays of Axisymmetric Air Jets Int. J. Heat Mass Transfer, Vol. 37, No 18, 1994
[9] Gillespie, Wang, Ireland & Kohler Full Surface Local Heat Transfer Coefficient Measurements in a Model of an Integrally Cast Impingement Cooling Geometry Journal of Turbomachinery, Vol. 120, January 1988
[10] Gau & Chung Surface Curvature Effect on Slot-Air-Jet Impingement Cooling Flow and Heat Transfer Process Journal of Heat Transfer, Vol. 113, Novemeber 1991
[11] Korotky & Taslim Rib Heat Transfer Coefficient Measurements in a RibRoughened Square Passage Journal of Turbomachinery, Vol. 120, April 1998
[12] Kiml, Mochizuki & Murata Effects of Rib Arrangements on Heat Transfer and Flow Behavior in a Rectangular Rib-Roughened Passage: Application to Cooling of Gas Turbine Blade Trailing Edge Journal of Heat Transfer, Vol. 123, August 2001
[13] Hong & Hsieh Heat Transfer and Friction Factor Measurements in Ducts with Staggered and Inline Ribs Journal of Heat Tranfer, Vol. 115, February 1993
[14] Taslim & Wadsworth An Experimental Investigation of the Rib Surface-Average Heat Transfer Coefficient in a RibRoughened Square Passage Journal of Turbomachinery, Vol. 119, April 1997
